Antares
ASC+ Engine Start Protect
ASC+ Engine Start Protect
The Engine Start Protect system is used on starting batteries to protect against discharge to levels where the cranking is endangered. It provides a timed auto isolation after a preset period of inactivity, and a manual on/off control.
A permanent fused feed through is offered to power feeds such as clocks, radios and central locking which would normally require resetting if disconnected.
The unit comprises of a high performance latching contactor, a control box and dashboard isolator switch assembly and all connecting looms.
Simple to install, the start protect isolator provides a complete solution to ensure the engine can crank at all times.
A permanent fused feed through is offered to power feeds such as clocks, radios and central locking which would normally require resetting if disconnected.
The unit comprises of a high performance latching contactor, a control box and dashboard isolator switch assembly and all connecting looms.
Simple to install, the start protect isolator provides a complete solution to ensure the engine can crank at all times.
Key Benefits-12V and 24V versions
-Vehicle loads 125A or 250A continuous -Auto timed isolation -Low voltage start protection -Manual override and control -Feed for clocks/ICE/central locking etc -Push button manual on/off control -3 sec accidental isolation protection -Cranking capability up to 1500A -Illuminated switch -Minimal power consumption at all times -Ignition on safety interlock -Customised versions 
|  |
Relevant components towards your solution
Cyclic Gel Batteries 12V/24V Jump Start DC Accessories Pure Sine Inverter ASC+ Integrated
