Welcome to the Antares design tools page

Below are two design tools to help you estimate what your application needs.  Please note that these are currently programmed in flash and may not be available in some browsers.  We are working on an updated version.

Cable sizing

  1. Select Voltage
  2. Enter the max load in Watts or Amps
  3. Tick AC (inverter) if an inverter is being used
  4. Enter cable length in metre

Battery autonomy calculator

  1. Select Battery voltage
  2. Select Battery type
  3. Enter load in (Watts) Note: The results include a 89% inverter efficiency, if you are not using an inverter please only use the number on the left hand side in Amps (A).
  4. Select to add batteries in parallel